Kia Sorento: Air conditioning System
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System
- Instructions
- Refrigeration Cycle
- Refrigerant Recovery
- Component Location
- Compressor Oil Specification
- Refrigerant Line Replacement
- Compressor Description
- Compressor Components
- Compressor Removal
- Compressor Installation
- Compressor Inspection
- Compressor Disassembly
- Condenser Inspection
- Condenser Replacement
- Receiver-Drier Replacement
- A/C Pressure Transducer Description
- A/C Pressure Transducer Inspection
- A/C Pressure Transducer Replacement
- Evaporator Temperature Sensor Description
- Evaporator Temperature Sensor Inspection
- Evaporator Temperature Sensor Replacement
- In-car Sensor (DATC only) Description
- In-car Sensor Inspection
- In-car Sensor Replacement
- Photo Sensor Description
- Photo Sensor Inspection
- Photo Sensor Replacement
- Ambient Temperature Sensor Description
- Ambient Temperature Sensor Inspection
- Ambient Temperature Sensor Replacement
- Auto Defogging Sensor Description
- Auto Defogging Sensor Inspection
- Auto Defogging Sensor Replacement
- Cluster Ionizer Description
- Cluster Ionizer Inspection
- Cluster Ionizer Replacement
Troubleshooting
Problem Symptoms Table
Before replacing or repairing air conditioning components, first determine
if the malfunction is due to the refrigerant charge, air flow or compressor.
Us ...
Instructions
When Handling Refrigerant
1.
R-134a liquid refrigerant is highly volatile. A drop on the skin
of your hand could result in localized frostbite. When handling the
r ...
See also:
CVVT & Camshaft Inspection
Continuously variable valve timing (CVVT) Assembly
1.
Inspect the CVVT for smooth rotation.
(1)
Clamp the camshaft using a vise. Be carefu ...
Driver Airbag (DAB) Module and Clock Spring Inspection
Driver Airbag (DAB)
If any improper parts are found during the following inspection, replace
the airbag module with a new one.
...
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Release the residual pressure in fuel line.
(Refe ...
Copyright В© www.ksmanual.com 2014-2024