Kia Sorento: A/C Pressure Transducer Inspection - Air conditioning System - Heating,Ventilation And Air Conditioning - Kia Sorento XM 2011-2024 Service ManualKia Sorento: A/C Pressure Transducer Inspection

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / A/C Pressure Transducer Inspection

1.
Measure the pressure of high pressure line by measuring voltage output between terminal “1” and “2”.

2.
Inspect the voltage value whether it is sufficient to be regular value or not.

Voltage = 0.00878835 * Pressure + 0.5

3.
If the measured voltage value is not wihtin specification, replace the A/C pressure transducer.
A/C Pressure Transducer Description
The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by o ...

A/C Pressure Transducer Replacement
1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery/charging station. 3. ...

See also:

Schematic Diagrams
MDPS Circuit Diagram Harness Connector Connector Pin no Pin name Battery 1 Battery + 2 Battery - Vehicl ...

Component Location
1. Cluster assembly 2. Seat belt switch 3. Vehicle speed sensor 4. Engine coolant temperature sender 5. Oil pressure switch 6. Brake fluid level warning switch 7. Parking ...

Cylinder Head Installation
   • Thoroughly clean all parts to be assembled. • ...

Copyright © www.ksmanual.com 2014-2024