Kia Sorento: Transfer Assembly

Special Service Tools

Tools (Number and name) Illustration Use 09431-45100 Oil seal installer Installation of transfer case oil seal. (Right side) ...

Transfer Fluid Inspection

   • Transfer oil should be inspected and refilled every 60000 km (40000 mile) / 4 year. ...

See also:

Rear Driveshaft Reassembly
1. Wrap tape around the driveshaft splines (TJ side ) to prevent damage to the boots. 2. Apply grease to the driveshaft and install the boo ...

Certification label
The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross Veh ...

Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fr ...