Kia Sorento: Heater
- Heater Unit Component Location
- Heater Unit Components
- Heater Unit Replacement
- Heater Core Replacement
- Evaporator Core Replacement
- Temperature Control Actuator Description
- Temperature Control Actuator Inspection
- Temperature Control Actuator Replacement
- Mode Control Actuator Description
- Mode Control Actuator Inspection
- Mode Control Actuator Replacement
- Auto Defogging Actuator Description
- Auto Defogging Actuator Inspection
- Auto Defogging Actuator Replacement
Cluster Ionizer Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to Body -"Crash Pad")
...
See also:
Specification
Items
Inner side
Outer side
Front driveshaft
2.4GDI M/T
Joint type
LSJ 104
UBJ 104
Max. permissible angle
23В°
...
Head Lamps Inspection
1.
Check-points upon head lamp failure (HID)
(1)
Check the battery voltage. (Low beam will be on when the
battery voltage above 9V.) ...
Rear Blower Resister Inspection
1.
Measure terminal-to-terminal resistance of the blower resistor.
2.
If the measured resistance is not within specification, the blower
re ...
Copyright В© www.ksmanual.com 2014-2023