Kia Sorento: Cooling System - Engine Mechanical System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Cooling System

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Engine Mechanical System / Cooling System

Crankshaft Reassembly
1. Install the main bearings.    Upper bearings have an oil groove of oil ho ...

Components
1. Cooling fan 2. Radiator upper hose 3. Radiator lower hose 4. Radiator 5. Condenser 6. Side air guard 7. Over flow hose 8. Reservior tank 9. Radiator cap ...

See also:

Power Mosfet (DATC) Inspection
1. Measure the resistance between the terminals. 2. If the measured resistance is not within specification, the blower resistor must be rep ...

Inspection
1. Turn ignition switch OFF. 2. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") ...

Fuel Tank Air Filter Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Lift the vehicle. 3. D ...

Copyright © www.ksmanual.com 2014-2019