Kia Sorento: Coupling Assembly

4WD ECU Installation

1. Install in the reverse order of removal. 2. Prior to installing a new ECU, upload the original ECU’s clutch learing to the replacement ...

Direct Electro Hydraulic Actuator Coupling Component Location

1. Coupling assembly 2. Propeller shaft 3. Transfer assembly ...

See also:

Front Hub / Knuckle / Tone Wheel Disassembly
1. Remove the brake disc (B) from the knuckle assembly (A). Tightening torque: 4.9 ~ 5.9N.m (0.5 ~ 0.6kgf.m, 3.6 ~ 4.3Ib-ft) ...

TPMS Sensor Description
1. Mode (1) Configuration State A. All sensors should be in the Low Line state. ...

Front Disc Brake Replacement
Front brake pads 1. Loosen the guide rod bolt (B) and then remove caliper body (A). 2. Replace pad shim (D), pad retainers (C) and b ...