Kia Sorento: Differential Carrier Assembly

Propeller Shaft Removal and Installation

1. After making a match mark on the flange yoke and transfer companion, remove the propeller shaft mounting bolts (A). Tightening torque: ...

Rear Differential Carrier Component

1. Rear Differential Carrier 2. Coupling Assembly ...

See also:

Starter Disassembly
1. Disconnect the M-terminal (A) on the magnet switch assembly (B). 2. After loosening the screws (A), detach the magnet switch assembly ...

Auto Defogging Actuator Description
The auto defogging sensor is installed on front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives ...

Muffler Removal and Installation
1. Remove the front muffler (A) after loosening the mounting nuts. Tightening torque: 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft ...