Kia Sorento: Starting System
Second Generation XM (2011-2023) / Kia Sorento XM 2011-2023 Service Manual / Engine Electrical System / Starting System
- Description
- Troubleshooting
- Starter Description
- Starter Specification
- Starter Components
- Starter Circuit Diagram
- Starter Removal
- Starter Installation
- Starter Disassembly
- Starter Reassembly
- Starter Inspection
- Starter Cleaning
- Starter Relay Inspection
Battery Sensor Installation
1.
Install in the reverse order of removal.
Battery sensor cable installation
bolt:
10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~ 10.1 lb ...
Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery ...
See also:
Overhead Console Lamp Installation
1.
Install the overhead console lamp after connecting the sunroof
switch connector and lamp connector.
2.
Install the lens after tightening ...
A/C Pressure Transducer Inspection
1.
Measure the pressure of high pressure line by measuring voltage
output between terminal “1” and “2”.
2.
Inspect the volt ...
Front Impact Sensor (FIS) Installation
•
Do not turn the ignition switch ON and do not contact
the battery cable while replac ...
Copyright © www.ksmanual.com 2014-2023