Kia Sorento: Driveshaft Assembly
- Front Driveshaft Components
- Front Driveshaft Removal and Installation
- TJ Joint Components
- TJ Joint Removal
- TJ Joint Inspection
- TJ Joint Installation
- Dynamic Damper Components
- Dynamic Damper Removal
- Dynamic Damper Installation
- BJ Boot Components
- BJ Boot Removal and Installation
Front Hub / Knuckle / Tone Wheel Inspection
1.
Check the hub for cracks and the splines for wear.
2.
Check the brake disc for scoring and damage.
3.
C ...
Front Driveshaft Components
1. Front driveshaft (LH)
2. Inner shaft bearing bracket
3. Front driveshaft (RH)
[LH]
1. BJ assembly
2. Clip
3. BJ boot band
4. BJ bo ...
See also:
Removal
1.
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
2.
Remove the battery and the battery tray.
...
PTG Spindle Installation
1.
Connect the PTG spindle, bracket and connector.
Tightening torque :
6.9 ~ 10.8N.m (0.7 ~ 1.1kgf.m, 5.1 ~ 8.0 lb-ft)
...
Examples of the types of accidents in which the driver’s/driver’s and front
passenger’s SRS frontal airbag(s) are not designed to deploy in most cases
The driver’s and front passenger’s SRS frontal airbags are not designed to
deploy
in most of the following cases.
If the vehicle is struck from the side or
from behind.
If the vehicle roll ...