Kia Sorento: Front Hub / Knuckle / Tone Wheel Inspection

Front Hub / Knuckle / Tone Wheel Disassembly

1. Remove the brake disc (B) from the knuckle assembly (A). Tightening torque: 4.9 ~ 5.9N.m (0.5 ~ 0.6kgf.m, 3.6 ~ 4.3Ib-ft) ...

Driveshaft Assembly

...

See also:

Filter replacement
It must be replaced when necessary, and should not be washed. You can clean the filter when inspecting the air cleaner element. Clean the filter by using compressed air. 1. Loosen the air clean ...

Rear Differential Carrier Reassembly
Pinion drive gear height adjustment Adjust the height of the drive pinion in the following order. 1. Below are the special tools to measure the pinion height ...

Limp Home Function
1. Limp Home By Tester If the PCM(ECM) detects the fault of the SMARTRA or transponder, the PCM(ECM) will allow limp home function of the immobilizer. Limp hom ...