Kia Sorento: Head lamp leveling Device

Auto Light Sensor Installation

1. Reconnect the auto light connector. 2. Install the auto light sensor. ...

Component Location

1. Head lamp leveling sensor & unit 2. Head lamp leveling actuator ...

See also:

Transmitter Code Registration (Using GDS)
1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. 2. ...

Removal
1. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") 2. Remove the battery and the battery tray. ...

Rear Oil Seal Installation
1. Install rear oil seal. (1) Apply engine oil to a new oil seal lip. (2) Using SST(09 ...