Kia Sorento: Auto Head lamp leveling Unit Description

According to driving environment and loading state of vehicle, head lamp lighting direction is changed to keep the driver's visibility range and to protect the driver's vision from glare, aiming at safety driving.

Sensor mounting on the rear center arm drives the actuator mounting on the head lamp since sensing the input signal following the vehicle's statical changes.

Head lamp beam is automatically operated by chassis tilt.

Purpose of AHLS(Auto Headlamp Leveling System)

Auto Head lamp leveling Unit Circuit Diagram

...

Auto Head lamp leveling Unit Operation

Operating Procedure 1. Suspension angle change resulted from vehicle's load change. 2. Height sensor signal change ...

See also:

Flat tire
The jack, jack handle, wheel lug nut wrench are stored in the luggage compartment. Pull up the luggage box cover to reach this equipment. (1) Jack handle (2) Jack (3) Wheel lug nut wrench (4) S ...

Engine Control Module (ECM) Circuit Diagram
...

Canister Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Lift the vehicle. 3. D ...