Kia Sorento: Auto Head lamp leveling Unit Installation

Height Sensor & Unit

Auto Head lamp leveling Unit Removal

Height Sensor & Unit 1. Disconnect the negative(-) battery terminal. 2. Remove the height sensor connector (A). ...

Auto Head lamp leveling Unit Inspection with GDS

Initialization and diagnosis sequence by using GDS equipment. Below content summarize the procedure for A/S using GDS. No. Procedure 1 Locate vehicle to flat ...

See also:

Description
Automatic transaxle system relies on various measurement data to determine the current control status and extrapolate the necessary compensation values. These values are used to control the a ...

IMS Power Seat Control Circuit Diagram
...

Power Mosfet (DATC) Inspection
1. Measure the resistance between the terminals. 2. If the measured resistance is not within specification, the blower resistor must be rep ...