Kia Sorento: Intake And Exhaust System

Oil Level Gauge & Pipe Removal and Installation

1. Remove the oil gauge(A). 2. Remove the intake manofold. (Refer to Intake And Exhaust System - "Intake Manifold") ...

Air Cleaner Components

1. Air duct 2. Air cleaner body 3. Air cleaner element 4. Air cleaner cover 5. Air intake hose 6. Clamp 7. Air intake shield ...

See also:

SRS Control Module (SRSCM) Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

Circuit Diagram
...

Rear Hub - Carrier Removal
1. Remove the front wheel and tire (A) from front hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...