Kia Sorento: Air Cleaner Removal and Installation - Intake And Exhaust System - Engine Mechanical System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Air Cleaner Removal and Installation

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Engine Mechanical System / Intake And Exhaust System / Air Cleaner Removal and Installation

1.
Remove the engine cover.
2.
Remove the air duct (A).

3.
Remove the battery.
(Refer to Engine Electrical System - "Battery")
4.
Remove the air cleaner assembly.
(1)
Disconnect the breather hose (A), the intensifier hose (B).
(2)
Disconnect the air intake hose (C) and then remove the air cleaner assembly (D).

5.
Install in the reverse order of removal.
Air Cleaner Components
1. Air duct 2. Air cleaner body 3. Air cleaner element 4. Air cleaner cover 5. Air intake hose 6. Clamp 7. Air intake shield ...

Intake Manifold Components
1. Intake manifold assembly 2. Electronic throttle body 3. Intake manifold stay 4. Intake manifold gasket ...

See also:

Transaxle Oil Temperature Sensor Inspection
1. Turn ignition switch OFF. 2. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") ...

Rear Hub - Carrier Removal
1. Remove the front wheel and tire (A) from front hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Fuel Filler Door Open Switch Inspection
1. Remove the front door trim panel. (Refer to Body - "Front door") 2. Disconnect the switch connector (A) from wiring. ...

Copyright © www.ksmanual.com 2014-2019