Kia Sorento: Vacuum Pump Repair procedures. Brake Line Components and Components Location
Kia Sorento (MQ4, 2021-2026) Service Manual / Brake System / Brake System / Vacuum Pump Repair procedures. Brake Line Components and Components Location
Vacuum Pump Repair procedures
| Removal |
| [THETA lll 2.5 T-GDI] |
| 1. |
Disconnect the battery negative ( - ) cable.
|
| 2. |
Remove the retaining clip (A), then remove the vacuum pump hose (B).
|
| 3. |
Remove the vacuum pump connector (A).
|
| 4. |
Remove the bolts, then remove the vacuum pump assembly (A).
|
| Installation |
| 1. |
Install in the reverse order of removal
|
Brake Line Components and Components Location
| Components |
| 1. HECU flare nuts. 2. HECU to master cylinder nuts. 3. HECU bracket nuts. 4. Master cylinder to HECU flare nuts |
5. Front brake caliper to brake hose bolt. 6. Front brake line tube flare nut. 7. Rear brake caliper to brake hose bolt. 8. Rear brake line tube flare nut. |
Removal
1.
Disconnect the (-) battery cable.
2.
Remove the ECM bracket assembly.
G 2.5 ...
Master Cylinder Repair procedures
Removal
...
Brake Line Repair procedures
See also:
Door Garnish Repair Procedures
Removal
1.
Remove the door garnish nuts (A).
Ti ...
Occupant Detection System (ODS)
Your vehicle is equipped with an occupant detection system in the front passenger's
seat.
The occupant detection system is designed to detect the presence of a properly-seated
front passenger ...
Propeller Shaft Repair procedures
Removal
1.
Remove the nut and remove the sub frame under cover (A).
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © www.ksmanual.com 2014-2026 - 0.0643