Kia Sorento: High Mounted stop lamp Removal - Lighting System - Body Electrical System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: High Mounted stop lamp Removal

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Lighting System / High Mounted stop lamp Removal

High Mounted Stop Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the tailgate trim.
(Refer to Body - "Body Side Moldings")
3.
Remove the high mounted stop lamp assembly after removing nuts (3EA).

License Lamps Installation
1. Install the bulb. 2. Install the license lamp lens. ...

High Mounted stop lamp Installation
1. Install the high mounted stop lamp. 2. Install the tailgate trim. ...

See also:

Dynamic Damper Components
1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly ...

Inside rearview mirror
Adjust the rearview mirror so that the center view through the rear window is seen. Make this adjustment before you start driving. WARNING - Rear visibility Do not place objects in the rear seat or ...

Muffler Removal and Installation
1. Remove the front muffler (A) after loosening the mounting nuts. Tightening torque: 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft ...

Copyright В© www.ksmanual.com 2014-2024