Kia Sorento: Under Body (4WD)
| Projected Dimensions |
| * These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
| Actual-Measurement Dimensions |
| * These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
|
|
|
|
| Front side member tooling hole (Ø25) |
Front side member tooling hole (Ø25) |
Side cover mounting hole (Ø11) |
|
|
|
|
| Side cover mounting hole (Ø11) |
Front sub frame mounting bolt |
Front sub frame mounting hole (Ø18) |
|
|
|
|
| Floor under cover mounting hole (Ø6.6) |
Front sub frame mounting hole (Ø11) |
Front side member tooling hole (Ø14) |
|
|
|
|
| Floor under cover mounting hole (Ø7) |
Floor under cover mounting hole (Ø7) |
Rear trailing arm mounting hole (Ø19) |
|
|
|
|
| Rear sub frame mounting hole (Ø22) |
Rear sub frame mounting hole (Ø7) |
Rear sub frame mounting bolt |
|
|
||
| Rear floor side member tooling hole (Ø14) |
Under Body (2WD)
Projected Dimensions
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
Actual-Measurement Dimensions
...
Front Cross Member
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
...
See also:
IMS module Installation
1.
Install the IMS module after reconnecting the connector.
2.
Install the driver seat.
...
SS-B Solenoid Valve(ON/OFF)
SS-B solenoid valve is attached to the valve body and is an on/off solenoid
valve that is used to change gears.
SS-B Solenoid valve(ON/OFF) is installed at valve body.
...
Front Hub / Knuckle / Tone Wheel Disassembly
1.
Remove the brake disc (B) from the knuckle assembly (A).
Tightening torque:
4.9 ~ 5.9N.m (0.5 ~ 0.6kgf.m, 3.6 ~ 4.3Ib-ft)
...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2025 Owners Manual
- Kia Sorento XM 2011-2025 Service Manual
Copyright www.ksmanual.com 2014-2025