Kia Sorento: High Mounted stop lamp Installation - Lighting System - Body Electrical System - Kia Sorento XM 2011-2022 Service ManualKia Sorento: High Mounted stop lamp Installation

Second Generation XM (2011-2022) / Kia Sorento XM 2011-2022 Service Manual / Body Electrical System / Lighting System / High Mounted stop lamp Installation

1.
Install the high mounted stop lamp.
2.
Install the tailgate trim.
High Mounted stop lamp Removal
High Mounted Stop Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the tailgate trim. (Refer to Body - " ...

Cargo Lamp Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the cargo lamp lens (A) with a flat-tip screwdriver. 3. ...

See also:

Engine Control Module (ECM) Installation
1. Install in the reverse order of removal. ECM installation bolt: 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m,7.2 ~ 8.7 lb-ft) ECM ...

Smart key unit Components
Connector Pin Information No. Connector A Connector B Connector C 1 V_BAT load C_CAN Low SSB illumination ground 2 ...

Blind Spot Detection Switch Inspection
1. Disconnect the BSD switch connector. 2. Operate the BSD switch, then check for continuity between terminals of BSD switch connec ...

Copyright © www.ksmanual.com 2014-2022