Front Oil Seal Removal and Installation
1.
Remove the crankshaft damper pulley.
(Refer to Timing System - "Crankshaft Damper Pullty")
2.
Remove the front oil seal(A). ...
Heated Steering wheel Inpection
1.
Measure a resistance of NTC and Heated pad.
A.
NTC resistance(Black / Yellow, Black) - 10.0 kΩ Â± 10%
(25°C)
...
Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake
door by a signal from the control unit. Pressing the intake selection switch
will shift between recirculation and fr ...