Kia Sorento: Component Location

Fuel Filler Door

...

Fuel Filler Door Release Actuator Inspection

1. Remove the fuel filler cover (A) after loosening screws (2EA). 2. Remove the fuel filler door module (A). ...

See also:

Inspection
1. Turn ignition switch OFF. 2. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") ...

Battery Installation
1. Install in the reverse order of removal. Battery (-)terminal installation nut: 4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft) ...

Steering Column and Shaft Inspection
1. Check the steering column for damage and deformation. 2. Check the joint bearing for damage and wear. 3. Che ...