Kia Sorento: Transfer Fluid Inspection - Transfer Assembly - 4 Wheel Drive (4WD) System - Kia Sorento XM 2011-2025 Service ManualKia Sorento: Transfer Fluid Inspection

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / 4 Wheel Drive (4WD) System / Transfer Assembly / Transfer Fluid Inspection

  
Transfer oil should be inspected and refilled every 60000 km (40000 mile) / 4 year.
1.
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
2.
Remove the oil filler plug (A).
[Gasoline 2.4]

[Gasoline 3.3]

3.
Check the oil level.
  
Oil level must be up to fill the hole, if not, add oil until it runs over.

4.
Install the oil filler plug with new gasket.

Tightening torque :
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

5.
Install the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
Transfer Assembly
...

Transfer Fluid Replacement
   Change Normal Use Severe Use No service required ...

See also:

TJ Joint Inspection
1. Check the spider assembly for roller rotation, wear or corrosion. 2. Check the groove inside the joint case for wear or corrosion ...

Variable Intake Solenoid (VIS) Valve
Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The ECM opens or ...

Hands Free Switch Installation
1. Install the handsfree remote switch to the steering wheel front cover. 2. Install the steering wheel front cover. 3 ...

Copyright www.ksmanual.com 2014-2025