Kia Sorento: Cluster Ionizer Inspection
| 1. |
Press the MODE switch more then 4 times within 2 seconds while
pressing the OFF switch.
* For diagnostic procedure, refer to DTC guide.
|
Cluster Ionizer Description
Cluster Ionizer ReplacementInspection
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the fuel pressure regulator valve connector.
...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column upper and lower shrouds (A) after removing
3 screws.
...
IPM Installation
1.
Install IPM(Intelligent intergrated Platform Module).
2.
Connect the IPM connector.
3.
Install the crash pad ...