Kia Sorento: Audio Unit Installation - Audio - Body Electrical System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Audio Unit Installation

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Body Electrical System / Audio / Audio Unit Installation

1.
Connect the audio unit connectors and cable.
2.
Install the audio unit.
3.
Install the center facia panel.
4.
Connect the negative (-) battery terminal.
  
A.
Make sure the connector are connected in properly.
B.
Check the audio system.
Audio Unit Removal
   Put on gloves to protect your hands.    ...

Speakers Inspection
1. Troubleshooting for Speaker (1) Basic inspection of speaker Inspect the sound from speaker after verifying that the s ...

See also:

Parking Brake Assembly Removal
Parking Brake Shoe 1. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear tire and wheel. 3. ...

Removal
1. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") 2. Remove the battery and the battery tray. ...

BJ Boot Components
1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly ...

Copyright © www.ksmanual.com 2014-2019