Kia Sorento: ICM (Integrated Circuit Module) Relay Box Component

Relay Box (Passenger Compartment) Installation

1. Install IPM(Intelligent intergrated Platform Module). 2. Connect the IPM connector. 3. Install the crash pad ...

ICM Relay Box Description

The ICM relay is united with rear wiper relay, rear blower relay, rear seat warmer relay (LH/RH), two turn unlock relay and tailgate latch relay which installed inside the lower crash pad. ...

See also:

Muffler Removal and Installation
1. Remove the front muffler (A) after loosening the mounting nuts. Tightening torque: 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft ...

Compressor Removal
1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. ...

Rear Blower Unit Replacement
1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recover/recycling/charging station. 3. ...