Kia Sorento: Rear Disc Brake Removal - Brake System - Brake System - Kia Sorento XM 2011-2021 Service ManualKia Sorento: Rear Disc Brake Removal

Second Generation XM (2011-2021) / Kia Sorento XM 2011-2021 Service Manual / Brake System / Brake System / Rear Disc Brake Removal

1.
Remove the rear wheel & tire.

Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

2.
Loosen the hose eyebolt (B) and caliper mounting bolts (C), then remove the rear caliper assembly (A).

Tightening torque:
Brake hose to caliper(B):
24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)
Caliper assembly to knuckle(C):
63.7 ~ 73.5 N.m (6.5 ~ 7.5 kgf.m, 47.0 ~ 54.2 lb-ft)

3.
Remove the rear brake disc by loosening the screws (A).

Rear Disc Brake Components
1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Inner pad shim 6. Brake pad 7. Pad retainer ...

Rear Disc Brake Replacement
1. Remove the rear wheel & tire. 2. Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way. ...

See also:

Trailer Hitches
WARNING Never drill the frame or under-body of your vehicle to install a commercial trailer hitch. If you do, dangerous exhaust gas, water or mud may enter the passenger compartment through the d ...

Oil Seal Replacement
[Right side] 1. Remove the front muffler. (Only gasoline 3.3) (Refer to Engine Mechanical System - "Front Muffler ") 2. Re ...

Alternate operation method for models with “keyless access with push-button start system”
Access key fob Lock button An access key fob can be used as the remote engine start transmitter. Operate the lock button to start or stop the engine as follows. Before starting the engine Befor ...

Copyright www.ksmanual.com 2014-2021