1. |
Place the shift lever into the "N" position.
|
2. |
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air cleaner")
|
3. |
Remove the battery and the battery tray.
(Refer to Engine Electrical System - "Battery")
|
4. |
Disconnect the inhibitor switch connector (A).
|
5. |
Remove the shift cable mounting nut (A).
|
6. |
Remove the manual control lever (B) and the washer after removing
a nut (A).
|
7. |
Remove the inhibitor switch (A) after removing the bolts (2ea).
|
Side Airbag (SAB) Module Installation
Be sure to install the harness wires not to be pinched or interfered
with other parts.
...
Rear wheel alignment
When using a commercially available computerized wheel alignment
equipment to inspect the rear wheel alignment, always p ...
Auto Defogging Actuator Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the auto defogging connector.
3.
Verify that the auto defoggin ...