Kia Sorento: Inhibitor Switch

Inhibitor Switch monitors the lever's position(P, R, N, D) and is used to control gear setting signals.

Installation

1. Install in the reverse order of removal.    • ...

Specifications

▷ Type: Combination of output signals from 4 terminals ▷ Specifications Power supply (V) 12 Output type Pin to Pin ▷ Signal ...

See also:

Rear Hub - Carrier Removal
1. Remove the front wheel and tire (A) from front hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Cargo Lamp Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the cargo lamp lens (A) with a flat-tip screwdriver. 3. ...

Lane Departure Warning System (LDWS) Unit Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the LDWS unit cover (A). 3. Remove the LDWS ...