Kia Sorento: Input Speed Sensor Description

Input speed sensor (A) is a vital unit that measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the Transaxle Control Module(TCM). The sensor provides critical input data that's used in feedback control, damper clutch control, gear setting control, line pressure control, clutch activation pressure control, and sensor fault analysis.

Transaxle Oil Temperature Sensor Installation

1. Install in the reverse order of removal.    • ...

Input Speed Sensor Specifications

▷ Type: Hall effect sensor Operation condition (°C)°F ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (0.95 ~ 1.55) 0.950 ~ 1.55 Output voltage ...

See also:

Front Disc Brake Removal
1. Remove the front wheel & tire. Tightening torque: 88.3 ~107.9 N.m (9.0 ~11.0 kgf.m, 65.1 ~79.6 lb-ft) ...

Rear Disc Brake Components
1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Inner pad shim 6. Brake pad 7. Pad retainer ...

Telemetics Unit (TMU) Component
Connector Pin Specification No. Pin Name Type From To Description (Wiring Spec.) 1 GND DC Ground TMU Battery ...