Kia Sorento: Input Speed Sensor Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sorento XM 2011-2020 Service ManualKia Sorento: Input Speed Sensor Specifications

Second Generation XM (2011-2020) / Kia Sorento XM 2011-2020 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Input Speed Sensor Specifications

▷ Type: Hall effect sensor
Operation condition (°C)°F
((-)40 ~ 150)) -40 ~ 302
Air gap(mm)in.
(0.95 ~ 1.55) 0.950 ~ 1.55
Output voltage(V)
High
1.18 ~ 1.68
Low
0.59 ~ 0.84

Input Speed Sensor Description
Input speed sensor (A) is a vital unit that measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the Transaxle Control Module(TCM). The sensor pr ...

Input Speed Sensor Circuit Diagram
...

See also:

Fuel Pump Motor Removal
1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the fuel sender connector (A). ...

Output Speed Sensor Removal
1. Remove the valve body assembly. (Refer to Hydraulic System - "Valve Body") 2. Disconnect the input & output speed senso ...

Positive Crankcase Ventilation (PCV) Valve Installation
1. Install in the reverse order of removal. PCV Valve installation: 1.9 ~ 2.8 N.m (0.19 ~ 0.29 kgf.m, 1.4 ~ 2.1 lb-ft) ...

Copyright © www.ksmanual.com 2014-2020