Kia Sorento: Hydraulic System
Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Automatic Transaxle System / Hydraulic System
- Description
- Component Location
- Oil Pump Description
- Oil Pump Component Location
- Oil Pump Component
- Fluid Component Location
- Fluid Service Adjustment Procedure
- Fluid Replacement
- Valve Body
- Valve Body Component Location
- Valve Body Removal
- Valve Body Installation
- ATF Warmer Description
- ATF Warmer Component Location
- ATF Warmer Component
- ATF Warmer Removal
- ATF Warmer Installation
Installation
1.
Install in the reverse order of removal.
If the oil seal on the trans ...
Description
The hydraulic system consists of oil, an oil filter, an oil pump, and
a valve body (valves and solenoid valves).
The oil pump is powered by the engine. ATF passes through the oil filter
...
See also:
Rear Hub - Carrier Removal
1.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
Spark Plug Installation
1.
Install in the reverse order of removal.
Tightening torque:
14.7 ~ 24.5 N.m (1.5 ~ 2.5 kgf.m, 10.8 ~ 18.0 Ib-ft)
...
Fuel Pump Inspection
[Fuel pump motor]
1.
Turn the ignition switch OFF, and then remove battery (-) cable.
2.
Remove the fuel pump assembly.
...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2025 Owners Manual
- Kia Sorento XM 2011-2025 Service Manual
Copyright www.ksmanual.com 2014-2025