Kia Sorento: Oil Pump Description

The oil pump is built-in as a single unit with the 26Brake chamber. Rotation of the pump builds the hydraulic pressure needed for the lubrication of the various parts of the transaxle and operation of the clutch and brakes. The oil also circulates through the torque converter and the cooler.

Component Location

1. Radiator(Automatic transaxle oil cooler) 2. Mounting insulator 3. Valve body cover 4. ATF hose&pipe 5. Automatic transaxle 6. Radiator(Automatic transaxle oil c ...

Oil Pump Component Location

1. Automatic transaxle 2. Oil pump assembly ...

See also:

Rear Disc Brake Removal
1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Crankshaft Damper Pulley Removal and Installation
1. Remove the drive belt. (Refer to Timing System - "Drive Belt") 2. Remove the passenger engine room side cover. (Ref ...

Head Lamps Inspection
1. Check-points upon head lamp failure (HID) (1) Check the battery voltage. (Low beam will be on when the battery voltage above 9V.) ...