Kia Sorento: ATF Warmer Installation - Hydraulic System - Automatic Transaxle System - Kia Sorento XM 2011-2020 Service ManualKia Sorento: ATF Warmer Installation

Second Generation XM (2011-2020) / Kia Sorento XM 2011-2020 Service Manual / Automatic Transaxle System / Hydraulic System / ATF Warmer Installation

1.
Install in the reverse order of removal.
  
Х
Adding automatic transaxle fluid.
(Refer to Hydraulic System - "Fluid")
Х
Adding coolant.
(Refer to Engine Mechanical System - "Coolant")
ATF Warmer Removal
1. Drain the coolant. (Refer to Engine Mechanical System - "Coolant") 2. Remove the air cleaner assembly and air duct. ...

Clutch & Brake
...

See also:

Side Body C
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Front side m ...

Emission control system
The emission control system of your vehicle is covered by a written limited warranty. Please see the warranty information contained in the Warranty & Maintenance booklet in your vehicle. Your v ...

Rear Wheel Speed Sensor Removal
4WD only 1. Remove the rear wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Copyright © www.ksmanual.com 2014-2020