Kia Sorento: Fuel Pressure Regulator Installation - Fuel Delivery System - Engine Control / Fuel System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Fuel Pressure Regulator Installation

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Pressure Regulator Installation

1.
Install in the reverse order of removal.
Fuel Pressure Regulator Removal
1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Release the fixing hooks, and then remove the regulator cup ( ...

Fuel Line Removal
1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Release the residual pressure in fuel line. (Refer to the F ...

See also:

Description
The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS). Instead of the traditional throttle cable, an Acc ...

Purge Control Solenoid Valve (PCSV)
Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when the ECM groun ...

TPMS Receiver Operation
1. General Function A. Auto learn takes place only once per Ignition cycle. B. On successful compl ...

Copyright © www.ksmanual.com 2014-2019