Kia Sorento: Starting System

Battery Sensor Installation

1. Install in the reverse order of removal. Battery sensor cable installation bolt: 10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~ 10.1 lb ...

Description

The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery ...

See also:

Heater Unit Components
1. Heater Case 2. B Pillar Case 3. Shower Duct 4. PTC Heater 5. Heater Core 6. Heater Core Cover 7. Mode Actuator 8. Mode Bracket 9. Mode Lever Main 10. Def D ...

Troubleshooting
Ignition System Symptom Suspect Area Remedy Engine will not start or is hard to start (Cranks OK) Ignition lock switch Inspect ignition ...

Roof Trim Replacement
Sunvisor Replacement 1. Remove the sunvisor cover (A). 2. After loosening the mounting screws, then remove the sunvisor (B) and retaine ...