Kia Sorento: External Amplifier Removal
Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Body Electrical System / AVN System / External Amplifier Removal
External Amplifier
| 1. |
Remove the passenger seat assembly.
(Refer to Body - "Front Seat Assembly")
|
| 2. |
Remove the external amplifier (A) after disconnecting the connectors
and loosening the mounting bolts (3EA).
|
External Amplifier Components
Connector Pin Information
No.
Connector A (26 pin)
Connector B (16 pin)
Connector C (12 pin)
1
Battery +
Right surround speaker +
...
External Amplifier Installation
External Amplifier
1.
Install the external amplifier after connecting the connector.
2.
Install the passenger seat assembly.
...
See also:
Relay Box (Engine Compartment) Component Location
...
Passenger Airbag (PAB) Module Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable from battery and wait for
at least thirty seconds bef ...
Rear Air Conditioner Unit Components
1. Rear Heater Case (LH)
2. Rear Heater Case (RH)
3. Lower Case
4. Drain Hose
5. Rear Evaporator Core
6. Refrigerant Line
7. Flange Lining
8. O-Ring
9. Rear ...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2025 Owners Manual
- Kia Sorento XM 2011-2025 Service Manual
Copyright www.ksmanual.com 2014-2025