Kia Sorento: Cruise Control Switch Removal - Cruise Control System - Engine Electrical System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Cruise Control Switch Removal

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Engine Electrical System / Cruise Control System / Cruise Control Switch Removal

1.
Disconnect the battery (-) terminal.
2.
Remove the air-bag module from the steering wheel. ( Refer to RT group)
3.
Loosen the 4 screws for remove steering wheel rear cover (A).

4.
Disconnect the cruise control switch connector (A).

5.
Remove the cruise control switch (A).

Cruise Control Switch Circuit Diagram
...

Cruise Control Switch Installation
1. Install in the reverse order of removal. ...

See also:

Heater & A/C Control Unit (Manual) Replacement
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the center fascia panel (A). ...

Inspection
   • Thoroughly check connectors for looseness, poor connection, bending, corrosion, contam ...

Rail Pressure Sensor (RPS)
Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor ...

Copyright © www.ksmanual.com 2014-2019