Kia Sorento: External Amplifier Installation - AVN System - Body Electrical System - Kia Sorento XM 2011-2020 Service ManualKia Sorento: External Amplifier Installation

Second Generation XM (2011-2020) / Kia Sorento XM 2011-2020 Service Manual / Body Electrical System / AVN System / External Amplifier Installation

External Amplifier
1.
Install the external amplifier after connecting the connector.
2.
Install the passenger seat assembly.
  
-
Make sure the speaker and related connectors are plugged in properly.
External Amplifier Removal
External Amplifier 1. Remove the passenger seat assembly. (Refer to Body - "Front Seat Assembly") 2. Remove the external a ...

Roof Antenna Components
...

See also:

Climate Control Air Filter Description
The climate control air filter is located in the blower unit. It eliminates foreign materials and odor. The particle filter performs a role as an odor filter as well as a conventional dust fi ...

Fuses
A vehicle’s electrical system is protected from electrical overload damage by fuses. This vehicle has 2 (or 3) fuse panels, one located in the driver’s side panel bolster, the other in the engine ...

Signal Waveform
The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle waveform is from the low side ...

Copyright © www.ksmanual.com 2014-2020