Kia Sorento: Tire Pressure Monitoring System (TPMS)The advanced Tire Pressure Monitoring System (TPMS) continuously tracks the pneumatic pressure of your Kia Sorento tires, delivering real-time telemetry straight to the instrument cluster display.
|
|
Low tire pressure warning indicator or system malfunction alert lamp
Individual low tire pressure position indicator light showing specific wheel locations on the instrument cluster screen
Tire Pressure Indicator
You can effortlessly review live tire pressure numbers in the assist mode screen on your Kia Sorento instrument cluster. For detailed configuration steps, consult the dedicated LCD display modes section.
The active tire pressure indicators typically populate on your dashboard display within one to two minutes after you begin driving your vehicle.
If precise tire pressures fail to show up while your vehicle is completely stationary, a helpful Drive to display notice will appear, prompting you to pull away and resume driving.
You have the flexibility to switch between your preferred pressure measurement units—such as psi, kPa, or bar—via the user customization settings located right on the instrument cluster menu.
TIP
Ambient parking conditions, aggressive driving styles, and significant changes in altitude above sea level can alter measured tire pressures naturally.
The digital values shown on your Kia Sorento instrument cluster might occasionally exhibit slight variations compared to standalone mechanical tire pressure gauges.
A low pressure caution chime can sometimes trigger when a specific tire's pressure drops close to surrounding tires, reflecting standard fluctuations tied directly to operating temperatures.
Effective use of TPMSFront Impact Sensor (FIS) Removal
•
Removal of the airbag must be performed according to the
precautions/ procedures des ...
Vehicle data collection and event data recorders
This vehicle is equipped with an event data recorder (EDR). The main purpose
of an EDR is to record, in certain crash or near crash-like situations, such as
an air bag deployment or hitting a road o ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the VIS valve connector.
3.
Measure resistance between VIS valve ...