1. |
Check the steering column for damage and deformation.
|
2. |
Check the joint bearing for damage and wear.
|
3. |
Check the tilt bracket for damage and cracks.
|
4. |
Check the key lock assembly for proper operation and replace it
if necessary.
|
Transmitter Code Registration (Using GDS)
1.
Connect the DLC cable of GDS to the data link connector (16 pins)
in driver side crash pad lower panel, turn the power on GDS.
2.
...
Rear Driveshaft Removal and Installation
1.
Remove the rear wheel and tire (A) from rear hub.
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
Rear Seat Belt Replacement
Second Row Seat Belt Replacement
•
When installing the belt, make sure not to damaged the ...