Kia Sorento: SS-B Solenoid Valve(ON/OFF)

SS-B solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears.

SS-B Solenoid valve(ON/OFF) is installed at valve body.

Installation

1. Install in the reverse order of removal.    • ...

Specifications

ON/OFF Solenoid Valve(SS-B) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33 (5.0, 71.12) Internal resistance(Ω) ...

See also:

Vehicle break-in process
No special break-in period is needed. By following a few simple precautions for the first 600 miles (1,000 km) you may add to the performance, economy and life of your vehicle. Do not race the e ...

Rear Differential Carrier Removal
1. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Specifications
Purge Control Solenoid Valve (PCSV) ▷ Specification Item Specification Coil Resistance (Ω) 19.0 ~ 22.0 [20°C(68°F)] Fuel Tank Pre ...