Kia Sorento: Specification

Rail Pressure Sensor (RPS)

Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor ...

Signal Waveform

...

See also:

Starter Cleaning
1. Do not immerse parts in cleaning solvent. Immersing the yoke assembly and/or armature will damage the insulation wipe these parts with a cloth only. ...

Rear Shock Absorber Removel
2WD 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 ...

Cylinder Head Reassembly
   Thoroughly clean all parts to be assembled. Before installing the parts, apply fresh engine oil to all sliding and ...