Kia Sorento: Rear Oil Seal Repair procedures - Cylinder Block - Engine Mechanical SystemKia Sorento: Rear Oil Seal Repair procedures

Kia Sorento (MQ4, 2021-2026) Service Manual / Engine Mechanical System / Cylinder Block / Rear Oil Seal Repair procedures

Replacement
1.
Remove the automatic transaxle assembly.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the drive plate.
(Refer to Cylinder Block - "Drive Plate")
3.
Remove the rear oil seal (A).

Engine Mechanical System — Cylinder Block / Rear Oil Seal / Repair procedures / Replacement illustration

4.
Apply engine oil to a new oil seal lip.
5.
Using the SST (09231 - H1100, 09214 - L1200), install the new rear oil seal (A).

Engine Mechanical System — Cylinder Block / Rear Oil Seal / Repair procedures / Replacement illustration

Note
Do not reuse the rear oil seal.
6.
Install in the reverse order of removal.
Drive Plate Repair procedures
Removal and Installation 1. Remove the automatic transaxle assembly. (Refer to Automatic Transaxle System - "Automatic Transa...
Piston and Connecting Rod Repair procedures
Disassembly ...
See also:

Removal
Special Service Tool Tool Name / Number Illustration Description Engine support fixture ...

Components and Components Location. Flow Diagram
Components and Components Location Components 1. Oil filter body2. Oil cooler3. O-ring4. Oil drain plug5. Oil drain plug gasket 6. ...

ATF Warmer Component
1. ATF Warmar 2. Bypass valve 3. ATF hose & pipe 4. Coolant hose & pipe ...

Copyright © www.ksmanual.com 2014-2026 - 0.0749