Kia Sorento: Drive Plate Repair procedures - Cylinder Block - Engine Mechanical SystemKia Sorento: Drive Plate Repair procedures

Kia Sorento (MQ4, 2021-2026) Service Manual / Engine Mechanical System / Cylinder Block / Drive Plate Repair procedures

Removal and Installation
1.
Remove the automatic transaxle assembly.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the driver plate adaptor (A) and driver plate (B).

Tightening torque :
127.5 - 137.3 N·m (13.0 - 14.0 kgf·m , 94.0 - 101.3 lb·ft)

Engine Mechanical System — Cylinder Block / Drive Plate / Repair procedures / Removal and Installation illustration

Note
Always use the new drive plate mounting bolts.
3.
Install in the reverse order of removal.
Components and Components Location. Water Jacket Insert Repair procedures
Components and Components Location Components 1. RH water jacket insert2. LH water jacket insert3. Cylin...
Rear Oil Seal Repair procedures
Replacement 1. Remove the automatic transaxle assembly. (Refer to Automatic Transaxle System - "Automatic Transaxle") ...
See also:

Lift And Support Points
   When heavy rear components such as suspension, fuel tank, spare tire, tailgate and trunk lid are to be removed, place addition ...

ESC OFF Switch Description and Operation. ESC OFF Switch Schematic Diagrams
ESC OFF Switch Description and Operation Description 1. The ESC OFF switch is for the user to turn off the ESC system. ...

Ignition Coil Specification
Item Specification Primary Coil Resistance (Ω) 0.62 ...

Copyright © www.ksmanual.com 2014-2026 - 0.0575