Kia Sorento: Operating conditions. Deactivating ISG - Idle Stop and Go (ISG) system - Driving your vehicleKia Sorento: Operating conditions. Deactivating ISG

Kia Sorento (MQ4, 2021-2026) Owner's Manual / Driving your vehicle / Idle Stop and Go (ISG) system / Operating conditions. Deactivating ISG

Operating conditions

The ISG system on your Kia Sorento functions only when a strict set of environmental and mechanical parameters are met:

NOTE

  • If any operational precondition fails, the ISG system temporarily deactivates. The indicator light on the physical ISG OFF button lights up, and the text “Auto Stop conditions not met” is displayed across the instrument cluster screen.

  • If this warning message persists continuously during your drives, inspect the underlying vehicle operating conditions.

Deactivating ISG

Kia Sorento center console physical ISG OFF control button
Auto stop. Auto start
Auto stop When you depress the brake pedal and bring your Kia Sorento to a complete halt while the Idle Stop and Go system is engaged, the engine cuts out automatically to conserve fuel. Ensure ...
ISG malfunction. Smart ISG features
ISG malfunction Your Kia Sorento features robust diagnostic monitoring; however, ISG may suspend operation if a related sensor or network module encounters a fault, resulting in the following ind...
See also:

4WD ECU Circuit Diagram and Connector
4WD ECU Connector Pin Function 1 MOTOR A 2 MOTOR B 3 LOCK MODE SWITCH (Input) 4 - ...

Side Body B
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] ...

Panorama Sunroof Adjustment
Inspect Glass Alignment 1. Inspect the alignment of the movable glass (C) that is between the front (A) and rear (B) glass and if needed adjust it. ...

Copyright © www.ksmanual.com 2014-2026 - 0.0289