Kia Sorento: On Vehicle Inspection
Driving test
Carry out pre-work vehicle driving tests to check vehicle behavior under normal driving conditions.
| 1) |
Check that the vehicle is going straight when release the steering wheel.
|
| 2) |
Check that the vehicle pulls to one side while accelerating and braking.
|
| 1) |
Check the vehicle pulls to one side while braking.
|
| 2) |
Check that the vehicle pulls to one side while accelerating or decelerating.
|
| 3) |
Check the part for noise or abnormal movement.
|
| 1) |
Turn the steering wheel and check if it returns when released.
|
| 2) |
Check if the vehicle is pulls in the direction in which the steering wheel was last turned.
|
| 3) |
Check the part for noise or abnormal movement.
|
| Deflected or protruded road |
| 1) |
Check if the vehicle changes direction.
|
| 2) |
Check the part for noise or abnormal movement.
|
| 3) |
Check if the vehicle is over-bouncing.
|
Tire Wear Inspection
Wheel and tire diagnosis
|
Rapid wear at the center
|
Rapid wear at both shoulders
|
Wear at one shoulder
|
|
|
|
|
|
•
|
Poor installing of tire
|
|
•
|
Excessive rapid acceleration
|
|
|
•
|
Poor installing of tire
|
|
•
|
Too low amount of Tire air pressure
|
|
•
|
Damaged suspension components
|
|
•
|
Excessive cornering speeds
|
|
|
•
|
Too low amount of Tire air pressure
|
|
•
|
Camber out of specification
|
|
•
|
Damaged suspension components
|
|
Partial wear
|
Feathered edge
|
Diagonal wear
|
|
|
|
|
|
•
|
Damaged or worn brake discs
|
|
•
|
Excessive sudden acceleration, sudden braking
|
|
•
|
Damaged suspension components
|
|
•
|
Too low amount of Tire air pressure
|
|
|
|
•
|
Camber out of specification
|
|
•
|
Damaged suspension components
|
|
Inspect steering system related parts
| 1) |
Check the universal joint for tightening, wear, damage and rust.
|
| 2) |
Check that the mounting is loose by moving the steering gearbox up and down, and if damaged, replace it.
|
| 3) |
Check the steering gearbox housing for abnormalities.
|
Inspect suspension system related parts
| 1) |
Check each suspension bushing for wear, cracks, etc.
|
| 2) |
Check the strut and shock absorber for damage.
|
| 3) |
Check the ride height.
|
| 4) |
Check the coil spring for damage or wear.
|
| 5) |
Check the lower arm ball joint for damage or free play.
|
Description
•
Wheel alignment is all forces due to friction, gravity, centrifugal force and inertia operate in a balanced
...
Wheel Alignment Repair Procedures
1.
When using the wheel alignment tester to check the wheel alignment, align the lift's vehicles
horiz...
Description and Operation
Repair Procedures
