Kia Sorento: Repair Procedures

Kia Sorento (MQ4, 2021-2026) Service Manual / Suspension System / Alignment / Repair Procedures

Wheel Alignment Repair Procedures

1.	When using the wheel alignment tester to check the wheel alignment, align the lift's vehicles horizontally.

2.	Set the transmission gear to 'N'.

Inflate the 4 tires to the specified tire pressure.

Tire Pressure

Tire Size	Tire Pressure [kPa (psi)]
235/65 R17	245 ~ 250 kPa (35 ~ 36 psi)
235/60 R18
255/45 R20

4.	Check the steering wheel and tires aligning straight.

5.	Hold the brake pedal depressed using a pedal stopper.

Measure the ride height, which is the distance from the end of the fender to the center of the wheel.

Ride Height :

Front (A) : 17.12 - 17.91 in. (435.0 - 455.0 mm)

Rear (B) : 17.68 - 18.47 in. (449.0 - 469.0 mm)

Suspension System — Alignment / Repair Procedures / Wheel Alignment Repair Procedures illustration

Adjust the alignment to the specification.

(Refer to Alignment - "Adjust")

Make sure to adjust the rear alignment first with curb weight and then adjust the front alignment by referring to the thrust angle.

After adjusting, shake the vehicle and check if the alignment value returns.

If the value changes significantly, check the suspension for free play or bushing damage and wear.

Perform the order below with the KDS.

(S/W Management → EPS - Power Steering → SAS Calibration)

Refer to the KDS screen for operating conditions and details

On Vehicle Inspection

On Vehicle Inspection Driving test Carry out pre-work vehicle driving tests to check vehicle behavior under normal driving conditions. On straight, flat road ...

Adjustment

Adjustment Rear Toe Turn the cam bolt (A) attached to the rear assist arm clockwise or counterclockwise to adjust the toe. Adjust the left and right ca...

Kia Sorento: Repair Procedures

See also:

Manuals list