Kia Sorento: Oil Temperature Sensor (E-Module) Removal

Removal

•	Automatic transaxle is composed of delicate components. Be careful not to cause any damage on the component in the course of assembly and disassembly.

•	Maintain clean condition so that foreign substance does not get into the automatic transaxle.

•	Use a coated apron, latex gloves, and stainless tray to prevent foreign substance from getting into the transaxle.

1.	Remove the engine room under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover")

2.	Drain the engine coolant. (Refer to Engine Mechanical System - "Coolant")

3.	Remove the valve body assembly. (Refer to Hydraulic System - "Valve Body")

4.	Disconnect the speed sensor connector (A).

Remove the speed sensor (A) after removing the bolts.

Tightening torque :

9.8 - 11.8 N·m (1.0 - 1.2 kgf·m, 7.2 - 8.7 lb·ft)

Automatic Transaxle System — Automatic Transaxle Control System / Oil Temperature Sensor (E-Module) / Removal illustration

6.	Disconnect the main connector (A).

Remove the clip (A) after removing the bolt.

Tightening torque :

9.8 - 11.8 N·m (1.0 - 1.2 kgf·m, 7.2 - 8.7 lb·ft)

Automatic Transaxle System — Automatic Transaxle Control System / Oil Temperature Sensor (E-Module) / Removal illustration

8.	Remove the connector (A) by pushing it downward.

Inspection 1. The automatic transaxle system can be more quickly diagnosed for problems by using the vehicle diagnostic system (KDS). (Refer ...

Installation ...

Manuals list