1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
2. |
Remove the front passenger seat assembly. (Refer to the Body group-
Seat)
|
3. |
Remove the seat cushion assembly. (Refer to the Body group- Seat)
|
All wheel drive (AWD)
Engine power can be delivered to all front and rear wheels for maximum traction.
AWD is useful when extra traction is required on roads, such as, when driving on
slippery, muddy, wet, or snow-cove ...
Filter replacement
It must be replaced when necessary, and should not be washed.
You can clean the filter when inspecting the air cleaner element. Clean the filter
by using compressed air.
1. Loosen the air clean ...
IPM Installation
1.
Install IPM(Intelligent intergrated Platform Module).
2.
Connect the IPM connector.
3.
Install the crash pad ...