1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the driver airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
|
3. |
Remove the steering wheel.
(Refer to Steering Wheel - "Steering Wheel Assembly")
|
4. |
Disengage the steering wheel remote switch connector assembly.
(Refer to Body Electrical System - "Audio Remote Control")
|
5. |
Remove the flex streeing switch (A).
|
6. |
Installation is the reverse of the removal.
|
Yaw-rate and G Sensor Installation
1.
Remove the ignition key from the vehicle.
2.
Install inthe reverse order of removal.
3.
After installing the ...
ECM Terminal And Input/Output signal
ECM Terminal Function
Connector [C300-A]
Pin
No.
Description
Connected to
1
Ignition Coil (Cylinder #2) control output
[NON-smart ke ...
Evaporator Temperature Sensor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater and blower assembly.
(Refer to Heater - "Heater Unit")
...